Advanced Engineering Tubing

Polyurethane Polyether 90 SHA Water Resistant Tube

TECHNICAL CHARACTERISTICS

HP is a new generation fitting studied to guarantee tightness with pressure ranges, considered so far “out of reach” with the push in version.

The fitting has been created and developed to be used in the Lubricant systems. Thanks to the innovative gripping system of the collet, our HP push in fitting can stand up to a maximum of 250 bar pressure.

the raw material used to producethese tubes is according to: - US Regulation - FDA 21CFR section 177.1550 and 21CFR section 178.3297 - European Regulation EC1935/2004 and UE10/2011 - Directive EEC 2011/65 (RoHS)

PHYSICAL/MECHANICAL PROPERTIES	TRIAL METHOD	VALUE
Hardness	DIN 53505 - ISO868	95 ShA / 48 ShD
Water absorption	23°C 50% r.h.	< 1%
Density	DIN 53479 - ISO1183	1,22 g/cm3
Elongation at break	DIN53504 - ISO37	550%
Tear resistance	DIN53515 - ISO34	100 N/mm
Flexural elastic modulus	ASTMD 790	100 MPa
Abrasion loss	DIN 53516 - ISO4649	30 mm3
Break resistance	DIN53504 - ISO37	55 MPa
Working temperature	-	- 40°C / +60°C